In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761

Product characteristics

Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1

Measuring range -1...10 bar -14.6...145 psi -100...1000 kPa -0.1...1 MPa

Process connection threaded connection 1/4" NPT Internal thread

Application

System gold-plated contacts

Measuring element ceramic-capacitive pressure measuring cell

Application for industrial applications

Media liquids and gases

Medium temperature [°C] -25...80

Min. bursting pressure 150 bar 2175 psi 15 MPa

Pressure rating 75 bar 1087 psi 7.5 Mpa

Vacuum resistance [mbar] -1000

Type of pressure relative pressure; vacuum

MAWP (for applications according to CRN) 50 bar 725 psi 5 MPa

In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761

Electrical data

Operating voltage [V] 18...30 DC; (to SELV/PELV)

Current consumption [mA] < 35

Min. insulation resistance [MΩ] 100; (500 V DC)

Protection class III

Reverse polarity protection yes

Power-on delay time [s] 0.3

Integrated watchdog yes

Inputs / outputs

Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1

Outputs

Total number of outputs 2

Output signal switching signal; analog signal; IO-Link; (configurable)

Electrical design PNP/NPN

Number of digital outputs 2

Output function normally open / closed; (configurable)

Max. voltage drop switching output DC [V] 2

Permanent current rating of switching output DC [mA] 250

Switching frequency DC [Hz] < 500

Number of analog outputs 1

Analog current output [mA] 4...20; (scalable 1:5)

Max. load [Ω] 500

Analog voltage output [V] 0...10; (scalable 1:5)

Min. load resistance [Ω] 2000

Short-circuit protection yes

Type of short-circuit protection yes (non-latching)

Overload protection yes

Measuring/setting range

Measuring range -1...10 bar -14.6...145 psi -100...1000 kPa -0.1...1 MPa

Analog start point -1...8 bar -14.6...116 psi -0.1...0.8 MPa

Analog end point 1...10 bar 14.6...145 psi 0.1...1 MPa

Factory setting / CMPT = 2

Set point SP -0.94...10 bar -13.6...145 psi -0.094...1 MPa

Reset point rP -0.98...9.96 bar -14.2...144.4 psi -0.098...0.996 MPa

Min. difference between SP and rP 0.06 bar 0.6 psi 0.006 MPa

In steps of 0.02 bar 0.2 psi 0.002 MPa

Status_B High Resolution / CMPT = 3

Set point SP -0.94...10 bar -13.6...145 psi -0.094...1 MPa

Reset point rP -0.98...9.96 bar -14.2...144.4 psi -0.098...0.996 MPa

Min. difference between SP and rP 0.06 bar 0.6 psi 0.005 MPa

In steps of 0.01 bar 0.1 psi 0.001 MPa

In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761

Accuracy / deviations

Switch point accuracy [% of the span] < ± 0,4; (Turn down 1:1)

Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)

Characteristics deviation [% of the span] < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)

Hysteresis deviation [% of the span] < ± 0,1; (Turn down 1:1)

Long-term stability [% of the span] < ± 0,05; (Turn down 1:1; per 6 months)

Temperature coefficient zero point [% of the span / 10 K] < ± 0,2; (-0...80 °C)

Temperature coefficient span [% of the span / 10 K] < ± 0,2; (-0...80 °C)

Notes on the accuracy / deviation switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%

Reaction times

Response time [ms] < 1.5

Delay time programmable dS, dr [s] 0...50

Damping process value dAP [s] 0...4

Damping for the analog output dAA [s] 0...4

Max. response time analog output [ms] 3

Software / programming

Parameter setting options hysteresis / window; normally open / closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output

Interfaces

Communication interface IO-Link

Transmission type COM2 (38,4 kBaud)

IO-Link revision 1.1

SDCI standard IEC 61131-9

SIO mode yes

Required master port class A; (when pin 2 not connected: B)

Supported DeviceIDs Type of operation DeviceID

Factory setting / CMPT = 2 473

Status_B High Resolution / CMPT = 3 989

Note For further information please see the IODD PDF file at "Downloads"

Factory setting / CMPT = 2

Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

Min. process cycle time [ms] 2.3

IO-Link resolution pressure [bar] 0.01

IO-Link process data (cyclical) Function bit length

pressure 14

binary switching information 2

IO-Link functions (acyclical) application specific tag

Status_B High Resolution / CMPT = 3

Profiles Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)

Min. process cycle time [ms] 3

IO-Link resolution pressure [bar] 0.005

IO-Link process data (cyclical) Function bit length

pressure 16

device status 4

binary switching information 2

In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761

IO-Link functions (acyclical) application specific tag

Operating conditions

Ambient temperature [°C] -25...80

Storage temperature [°C] -40...100

Protection IP 65; IP 67

Tests / approvals

EMC DIN EN 61000-6-2

DIN EN 61000-6-3

Shock resistance DIN EN 60068-2-27 50 g (11 ms)

Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz)

MTTF [years] 138

UL approval UL approval number J012

Pressure equipment directive sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g] 223.5

Material stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC

Materials (wetted parts) stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM

Min. pressure cycles 100 million

Tightening torque [Nm] > 50; (Depends on lubrication, seal and pressure rating)

Process connection threaded connection 1/4" NPT Internal thread

Restrictor element integrated no (can be retrofitted)

Displays / operating elements

Display Display unit 3 x LED, green (bar, psi, MPa)

Switching status 2 x LED, yellow

Measured values alphanumeric display, red/green 4-digit

Remarks

Pack quantity 1 pcs.

Electrical connection

Connection Connector: 1 x M12; coding: A; Contacts: gold-plated

In Stock IFM PN2294 PN-010-REN14-MFRKG/US/ /V Pressure sensor with display

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761