Schneider Electric BMXCPS4022H redundant power supply module X80 - 24..48 V DC -for severe environments
Main
Range of product Modicon X80
Product or component type Power supply module
backplane compatibility All backplane
Product specific application For severe environments
advanced diagnostics available via network Temperature sensing
Uptime duration
Redundancy test
Remaining lifetime
Redundancy information
Primary voltage 24...48 V
Supply circuit type DC
Secondary power 18 W 3.3 V DC at -25…70 °C I/O module logic power supply
40 W 24 V DC at -25…70 °C I/O module power supply and processor if 3.3 V not loaded
Complementary
Primary voltage limit 18...62.4 V
Input current 1.9 A 24 V
1 A 48 V
Inrush current 60 A 48 V
60 A 24 V
I²t on activation 1 A².s 24 V
3 A².s 48 V
It on activation 0.3 A.s 24 V
0.4 A.s 48 V
Protection type Internal fuse not accessible for primary circuit
Overload protection for secondary circuit
Overvoltage protection for secondary circuit
Short-circuit protection for secondary circuit
Current at secondary voltage 5.5 A 3.3 V DC I/O module logic power supply
1.67 A 24 V DC I/O module power supply and processor
Maximum power dissipation in W 8.5 W
Status LED 1 LED (green) presence of voltages (OK)
1 LED (green) redundancy OK
1 LED (green) power supply status
Control type RESET push-button cold restart
Electrical connection 1 connector 2 pin(s)alarm relay
1 connector 5 pin(s)line supply, protective earth
Maximum cable distance between devices 10 m
15 m
Insulation resistance >= 100 MOhm primary/ground
>= 100 MOhm primary/secondary
Net weight 0.81 kg
Environment
Immunity to microbreaks 1 ms
Dielectric strength 1500 V primary/ground
1500 V primary/secondary
IP degree of protection IP20
Directives 2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
2014/34/EU - ATEX directive
Product certifications CE
UL
CSA
RCM
EAC
Merchant Navy
ATEX zone 2/22
IECEx zone 2/22
Standards EN/IEC 61131-2
EN/IEC 61010-2-201
UL 61010-2-201
CSA C22.2 No 61010-2-201
IACS E10
EN/IEC 61000-6-5, interface type 1 and type 2
EN/IEC 61850-3, location G
EN/IEC 60079-0
Environmental characteristic Gas resistant class Gx conforming to ISA S71.04
Gas resistant class 3C4 conforming to IEC 60721-3-3
Dust resistant class 3S4 conforming to IEC 60721-3-3
Sand resistant class 3S4 conforming to IEC 60721-3-3
Salt resistant level 2 conforming to IEC 68252
Mold growth resistant class 3B2 conforming to IEC 60721-3-3
Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
Hazardous location class I division 2
Ambient air temperature for storage -40…85 °C
ambient air temperature for operation -25…70 °C
Relative humidity 10…95 % without condensation
Protective treatment Conformal coating
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 9 cm
Package 1 Width 18 cm
Package 1 Length 25 cm
Package 1 Weight 640 g
Unit Type of Package 2 S03
Number of Units in Package 2 6
Package 2 Height 30 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 3.84 kg
Unit Type of Package 3 P06
Number of Units in Package 3 48
Package 3 Height 70 cm
Package 3 Width 60 cm
Package 3 Length 80 cm
Package 3 Weight 43.2 kg
Similar model numbers:
BMXCPS4002S
BMXCPS3522
BMXCPS4022
BMXCPS3522H
BMXCPS4022H
BMXCPS3522S
BMXCPS4022S
BMXXTSCPS10
BMXXTSCPS20
Any questions, feel free to contact us
jeff@hkxytech.com jeff@whxyauto.com +86-15072331761
