Pepperl+Fuchs KFU8-USC-1.D Signal Converter with Trip Value
General specifications
Signal type Analog input
Supply
Connection terminals 14, 15
Rated voltage 20 ... 90 V DC / 48 ... 253 V AC
Rated current ≤ 80 mA DC / ≤ 45 mA AC
Power consumption ≤ 1.6 W / ≤ 2.6 VA
Input
Connection side field side
Connection terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA
Input resistance voltage: 1 MΩ , current: max. 100 Ω
Limit 30 V
Current 0 ... 20 mA
Voltage 0 ... 10 V / 0 ... 60 mV
Resolution 15 Bit
Output
Connection side control side
Connection output I: terminals 10, 11, 12
output II: terminals 7-, 8+, 9-
Output I signal, relay
Contact loading 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A
Mechanical life 2 x 107 switching cycles
Energized/De-energized delay approx. 10 ms / approx. 10 ms
Output II analog
Load current: max. 550 Ω , voltage: min. 1 kΩ
Analog voltage output 0/1 ... 5 V , 0/2 ... 10 V
Analog current output 0/4 ... 20 mA
Transfer characteristics
Deviation 0.1 % of full-scale value
Resolution/accuracy current: 1 µA/20 µA
voltage: 0.5 mV/10 mV
mV: 3 µV/60 µV
Influence of ambient temperature 0.003 %/K (30 ppm)
Reaction time ≥ 150 ms/≤ 300 ms
Galvanic isolation
Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements display
Control elements Control panel
Configuration via operating buttons
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EU EN 61010-1:2010
Conformity
Electromagnetic compatibility NE 21
Degree of protection IEC 60529
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass 150 g
Dimensions 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Similar model numbers:
KCD2-UT2-1
KFD0-CC-1
KFD0-TR-1
KFD2-GUT-1.D
KFD2-USC-1.D
KFD2-UT2-1
KFD2-UT2-2
KFU8-GUT-1.D
KFU8-USC-1.D
KFU8-VCR-1
KCD2-UT2-1
KFD2-UT2-1
KFD2-UT2-2
KFD2-WAC2-1.D
KFD0-TT-1
KFD2-UT2-1-1
KFD2-UT2-2-1
Any questions, feel free to contact us
jeff@hkxytech.com jeff@whxyauto.com +86-15072331761
