Signal Conditioners and Modules
Pepperl+Fuchs KCD2-SCS-2.SP SMART Transmitter Power Supply/SMART Current Driver

Pepperl+Fuchs KCD2-SCS-2.SP SMART Transmitter Power Supply/SMART Current Driver

Model: KCD2-SCS-2.SP

Supplier: Pepperl+Fuchs

Categories: Signal Conditioners and Modules

After sales service. If you have any questions, click here.

PRODUCT DESCRIPTION

Pepperl+Fuchs KCD2-SCS-2.SP SMART Transmitter Power Supply/SMART Current Driver

SMART Transmitter Power Supply SMART Current Driver2

General specifications

Signal type Analog input/analog output

Functional safety related parameters

Safety Integrity Level (SIL) SIL 2

Systematic capability (SC) SC 3

Supply

Connection Power Rail or terminals 9+, 10-

Rated voltage 19 ... 30 V DC

Ripple max. 10 %

Rated current max. 88 mA at 24 V

Power dissipation max. 1.4 W

Power consumption max. 2.1 W

Analog input

Number of channels 2

Suitable field devices 2-wire SMART transmitters

Signal 0/4 ... 20 mA , limited to approx. 30 mA

Field circuit terminals 1+, 2-, 3+, 4-

Available voltage min. 15 V at 20 mA

min. 18 V at 4 mA

Control circuit terminals 5-, 6+; 7-, 8+

Input voltage Voltage across terminals 10 ... 30 V. If the current is supplied from a source > 24 V,

series resistance of ≥ (V - 24)/0.02 Ω is needed, where V is the source voltage.

The maximum value of the resistance is (V - 10)/0.02 Ω. (sink output)

Load max. 350 Ω (source output)

Ripple 20 mV eff

Analog output

Number of channels 2

Suitable field devices SMART I/P converters (positioner), on-site-displays

Signal 0/4 ... 20 mA , limited to approx. 30 mA

Field circuit terminals 1+, 2-, 3+, 4-

Load max. 650 Ω

Voltage min. 13 V at 20 mA

Ripple 20 mV eff , on all signal terminals

Control circuit terminals 5-, 6+; 7-, 8+

Voltage drop max. 6 V

Line fault detection > 100 kΩ at max. 30 V, with field wiring open

Transfer characteristics

Deviation max. 20 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage

Influence of ambient temperature < 2 µA/K (-40 ... 70 °C (-40 ... 158 °F))

Frequency range field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)

control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)

Settling time max. 200 ms

Rise time/fall time max. 100 ms (10 ... 90 %)

Galvanic isolation

Field circuit/control circuit basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff

Control circuit/control circuit functional isolation, rated voltage: 50 V

Field circuit/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff

Control/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff

Indicators/settings

Display elements LED

Configuration via DIP switches

Labeling space for labeling at the front

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity

Electromagnetic compatibility NE 21:2017

EN 61326-3-2:2018

Degree of protection IEC 60529

Ambient conditions

Ambient temperature -40 ... 70 °C (-40 ... 158 °F)

Mechanical specifications

Degree of protection IP20

Connection spring terminals

Mass approx. 115 g

Dimensions 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2

Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001


Similar model numbers:

KCD2-SCS-2

KCD2-SCS-2.SP

KFD0-CS-1.50

KFD0-CS-2.50

KFD0-SCS-1.55

KFD0-CS-2.51P


Any questions, feel free to contact us

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761

Related Products

Payment Methods