Schneider Electric ATS22D88S6U soft starter-ATS22-control110V-power 208V(25hp)/230V(30hp)/460V(60hp)/575V(75hp)
Main
Range of productAltistart 22
Product or component typeSoft starter
Product destinationAsynchronous motors
Product specific applicationPumps and fans
Component nameATS22
Network number of phases3 phases
[Us] rated supply voltage208...600 V - 15...10 %
motor power hp25 hp 208 V
30 hp 230 V
60 hp 460 V
75 hp 575 V
Factory setting current77 A
power dissipation in W66 W for standard applications
Utilisation categoryAC-53A
Type of startStart with torque control (current limited to 3.5 In)
IcL starter rating88 A for connection in the motor supply line for standard applications
IP degree of protectionIP20
Complementary
Assembly styleWith heat sink
Function availableInternal bypass
Supply voltage limits177…660 V
supply frequency50...60 Hz - 10...10 %
Network frequency45...66 Hz
Device connectionIn the motor supply line
[Uc] control circuit voltage110 V - 15...10 % 50/60 Hz
Control circuit consumption20 W
Discrete output number2
discrete output typeRelay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current100 mA at 12 V DC (relay outputs)
maximum switching current5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
Discrete input number3
discrete input type(LI1, LI2, LI3) logic, 5 mA 20 kOhm
discrete input voltage110 V <= 121 V
discrete input logicPositive logic LI1, LI2, LI3 at State 0: < 20 V and <= 15 mA at State 1: > 79 V, <= 2 mA
output current0.4...1 Icl adjustable
Communication port protocolModbus
connector type1 RJ45
Communication data linkSerial
Physical interfaceRS485 multidrop
Transmission rate4800, 9600 or 19200 bps
Installed device31
protection typePhase failure: line
Thermal protection: motor
Thermal protection: starter
MarkingCE
Type of coolingForced convection
Operating positionVertical +/- 10 degree
Height295 mm
Width145 mm
Depth207 mm
Net weight12 kg
Environment
electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
StandardsEN/IEC 60947-4-2
Product certificationsUL
CSA
GOST
C-Tick
CCC
vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Noise level45 dB
pollution degreeLevel 2 conforming to IEC 60664-1
relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation-10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)
Ambient air temperature for storage-25…70 °C
operating altitude<= 1000 m without derating
> 1000...< 2000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height31.0 cm
Package 1 Width36.0 cm
Package 1 Length23.0 cm
Package 1 Weight8.305 kg
Unit Type of Package 2P06
Number of Units in Package 26
Package 2 Height73.5 cm
Package 2 Width80.0 cm
Package 2 Length60.0 cm
Package 2 Weight64.72 kg
Similar model numbers:
ATS22C11S6U
ATS22C14S6U
ATS22C17S6U
ATS22C21S6U
ATS22C25S6U
ATS22C32S6U
ATS22C41S6U
ATS22C48S6U
ATS22C59S6U
ATS22D17S6U
ATS22D32S6U
ATS22D47S6U
ATS22D62S6U
ATS22D62S6U
ATS22D88S6U
Any questions, feel free to contact us
jeff@hkxytech.com jeff@whxyauto.com +86-15072331761
