Pepperl+Fuchs KFD2-VM-Ex1.35.L Solenoid Driver

General specifications

Signal type Digital Output

Supply

Connection Power Rail or terminals 11+, 12-

Rated voltage 20 ... 30 V DC

Ripple ≤ 10 %

Rated current ≤ 52 mA

Power dissipation typ. 1.2 W

Power consumption < 1.5 W

Input

Connection side control side

Connection terminals 7+, 8+, 9+

Signal level 1-signal: 15 ... 30 V DC ; input current: approx. 2.3 mA at 24 V DC

0-signal: 0 ... 5 V DC or open input

Response delay 5 ... 30 ms (typical 10 ms)

Output

Connection side field side

Internal resistor max. 410 Ω

Current typ. 18 mA

Voltage typ. 16 V

Limit current IE: ≥ 17 mA; typ. 18 mA

voltage UE: ≥ 15.3 V; typ. 16 V

Open loop voltage min. 22.3 V

Connection terminals 4+, 6-

Output rated operating current 17 mA

Output signal These values are valid for the rated operating voltages from 20 ... 30 V DC.

Transfer characteristics

Switching frequency 15 Hz

Galvanic isolation

Input/power supply not available

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity

Electromagnetic compatibility NE 21

Degree of protection IEC 60529:2001

Ambient conditions

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)

Mechanical specifications

Degree of protection IP20

Connection screw terminals

Mass approx. 150 g

Dimensions 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1

Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

Similar model numbers:

KCD0-SD3-Ex1.1045

KCD0-SD3-Ex1.1245

KCD2-SLD-Ex1.1045

KCD2-SLD-Ex1.1065

KCD2-SLD-Ex1.1245

KFD0-SD2-Ex1.10100

KFD0-SD2-Ex1.1180

KFD2-VM-Ex1.35.L

KFD2-SLD-Ex1.13100

KCD0-SD3-Ex1.1245.SP

KCD0-SD-Ex1.1245

KCD0-SD-Ex1.1245.SP

KFD0-SD2-Ex1.1045

KFD0-SD2-Ex1.1065

KFD0-SD2-Ex2.1045

KFD0-SD2-Ex2.1245

KFD2-SL2-Ex2

KFD2-SL2-Ex2.B

Any questions, feel free to contact us

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761